Episode Transcript
[00:00:00] Speaker A: We were excited to show off Val for the first time in 2004 when we used her to build the first and largest neighborhood in Canada. It's a residential neighborhood where VAL3D printed the first floor of this two story townhouse structure, 26 units.
[00:00:23] Speaker B: Hello everyone and welcome to the Robot Industry Podcast. My name is Jim Beretta and I'm your host and I'm going to welcome today Nguyen Nguyen. She is the CEO of Horizon Legacy and I know her from robot side of the industry and I've had the opportunity to visit their Mississauga headquarters. So welcome to the podcast.
[00:00:41] Speaker A: Hi Jim, very nice to be here with you.
[00:00:44] Speaker B: Well, I'm excited for this episode because I think what you're doing is very, very cool. And for listeners who don't know about Horizon Legacy, can you tell us a little bit more about the company and how you got involved?
[00:00:57] Speaker A: Horizon Lacy is a Canadian based real estate development company.
It was founded in 1952. I am the third CEO in the company's history. We were very much into real estate development and then infrastructure, energy infrastructure, renewable energy development, until about six years ago when we opened up a new chapter and took an interest in construction technology and robotics. So we've been doing that for the last six years since the pandemic, and lately we've been working on building buildings using this technology.
[00:01:34] Speaker B: And how did you personally go from like the development side of the business to leading a company that's now developing construction robotics?
[00:01:41] Speaker A: Totally unexpected and unplanned, for the record.
So my background was in computer engineering. I went to University of Ottawa. I grew up in Ottawa.
And then 2008, I was inspired to renewable energy development.
Did end up doing that for about 15 years, and as a result of that, spent a lot of time in hanging out with construction people and learning the process for putting together projects. Six years ago, during the pandemic, my boss, who's the company's chairman and owner, said, you know, he was watching a commercial one day about workers recruiting workers into the trades, the construction trades. And he came into the office the next day and he said, you know, we've got a real problem in housing. We don't have enough people to build all the infrastructure that we need to build. How can we use technology and specifically robots to do this? And so that's how this whole rabbit hole started.
[00:02:42] Speaker B: People often describe the technology, and I'm guilty of this, as 3D printing homes, but I know you think more broadly as construction automation. And for our listeners, what's the difference?
[00:02:54] Speaker A: Yes. So Since I've been working on this in the last couple of years, what the audience would be really interested in learning is that there's a broad emergence of construction robotics and technology that has been growing globally in the last couple of years.
And so 3D concrete printing is one specific type of technology.
It's a robot that lays concrete using the additive manufacturing process.
But it's one material and it's one specific technique. But construction automation is more broadly defined than just concrete 3D printing. And we at Horizon are interested in construction automation as different technologies and tools. But we have started with concrete 3D printing.
[00:03:43] Speaker B: You went down the path of using like a six axis industrial robot. So why sixaxis? And how is your approach different from some of the other construction 3D printing systems that you've seen?
[00:03:55] Speaker A: Yeah, so Jim, you know that every single technology has its pros and cons.
What we view from a construction perspective is that, and we're not purely a technology company, we're a construction first company.
And what I mean by that is that technologies exist merely for technology's sake. It has to be relevant and useful for us in construction. And so in that context, six axis robots and mobile systems are much faster to deploy and mobilize and demobilize.
So we view it as more advantageous from a logistics standpoint for people who are interested in this space. I've met a lot of people who are working on construction robots, and they're brilliant PhDs in their own right. But the other half of the equation that they sometimes miss is how you move stuff from site to site, location to location.
And that is equally, if not sometimes more important because it takes away at the efficiency of the task that you're trying to accomplish.
[00:05:01] Speaker B: Anion, thank you for that. Let's get into the robots themselves. And who is, or what is VAL and Dolly and what do they actually do at a construction site?
[00:05:10] Speaker A: Yeah, so we gave birth to Val, I think about two years ago, Val 2.0. So we've done now three versions of Val.
The third version we call Dolly. So it's sort of a sister of val. These two robots are robots that lay concrete without formwork. And we were excited to show off Val for the first time in 2004 when we used her to build the first and largest neighborhood in Canada. It's a residential neighborhood where VAL3D printed the first floor of this two story townhouse structure, 26 units.
And then her sister Dolly was born last year. Dolly Bell's sister is being used to construct a three story residential Building west of Hamilton right now.
[00:06:00] Speaker B: So if I showed up at one of your sites, what would I actually see?
[00:06:04] Speaker A: You'd see a really well organized job site.
So our construction site's got all the key elements of similar to traditional job site. So you have your site trailers, you have your safety setups, you have typical people, site supers, general workers, workers and trades in different areas.
We use a standard foundation to build our residential buildings.
And then Val and Dolly's work starts. Everything above the slab, everything above the foundation.
And so they're constructing vertical, structural, load bearing and non load bearing walls. That means that it's some of them are bearing weight, structural weight, and others are interior partitions. And you've got for each, what we call each printer cell, you've got three to four people working around it to operate the system and the machines. And we've got on each site, we're currently doing either one to two cells per site and we're going to be scaling up to up to four per site. So you have three or four robots running around building portions of the building and then the other parts are done using traditional processes.
[00:07:22] Speaker B: Thank you for that. What happens when the robot system arrives to the point where you're actually ready to start building?
[00:07:28] Speaker A: So Val is transported in one of two ways. So she gets transported in a standard transport truck that you've seen many of those along the highway.
You know, you pack her with a few equipment so maybe one, one to two trucks and truck arrives on site. She rolls off the site, we have an operator that puts her into position. We go through typical for folks that are familiar with industrial automation, we go through typical calibration process, orient valve, so she knows where to point to and then she does her thing. And then she works with the crew.
They work your standard shifts, eight or ten hour days.
And then she shuts down, she goes to sleep, we pack her up and then starts to work the next day.
[00:08:20] Speaker B: And what part of the building are the robots actually constructing? And where does robots stop? And conventional construction and tradespeople take over.
[00:08:28] Speaker A: Val and Dolly are building what we call the superstructure and the envelope of the building.
So superstructure is a technical term meaning the structural core of the building that's typically built out of concrete. And then the building envelope is the skin of the building. It's like the jacket for the building that keeps it warm and watertight and weatherproof.
Now the envelope includes also windows, doors, roofs and openings. But obviously Val's not doing those parts, but she's doing the other parts of the building's. Skin.
[00:09:01] Speaker B: So building robots one thing, but building a system that you can actually operate on a construction site is quite another. What did you have to bring together to make that possible?
[00:09:10] Speaker A: That's exactly it. The misconception is that the robot is enough and it's not to go through the project cycle of constructing a building.
You are introducing a piece of technology into a very complicated process that it relates to.
Just like when you're building a house, you have to go and get a building permit.
[00:09:34] Speaker B: Sure.
[00:09:35] Speaker A: You have to prepare drawings with architects and engineers that say, this is how my house is going to satisfy. We have Ontario building codes and national building codes and testing and standards.
So in addition to building val, we also had to undergo the very similar process that anyone would go through when they're constructing a new home.
It just happens that the building is bigger than your average single family home.
[00:10:04] Speaker B: You did a lot of prototyping before putting this technology into a real construction site. When did you know you were ready to move from the lab to an actual construction?
[00:10:13] Speaker A: You know, when we're doing something new, you always try to plan things out as best as you can and think through all the scenarios. But the reality was, is as we were building Gannon Aqua, we had a lot of surprises and stumbles.
Sometimes last minute, sometimes we had to address things while we were on the go, like under construction. You know, to answer your question, before we knew we wanted to build this neighborhood, we had undergone, you know, planning, engineering, testing and certifications in our research and development lab. We created at Horizon, the first construction research and development facility in Canada so that we could incubate, develop and test new technologies like this for construction. You can't just send a robot out that you just built.
So wanted to do risk reduction. But nevertheless, like I said, when we rolled VAL to the site, there were just lots of things that you can't really anticipate until you're there and you're in the middle of it.
And so there were also a lot of problem solving on site, dynamically, on things that you never encounter unless you put a robot on a construction site for the first time ever.
So some of those moments, in retrospect, in the moment it was sort of you wanted to pull out your hair.
But now when we look at it, it sort of becomes an earned badge of experience. I guess I'll call it that way.
[00:11:43] Speaker B: So this part in our conversation brings us to Ganon Akwe. So Horizon Legacy claims it's Canada's first and largest neighborhood in Canada, built by robots. And you took the technology and deployed it on this real 26 residential unit development can tell us a little bit more about that project and what you were trying to prove and why this is so important.
[00:12:04] Speaker A: The context of this is that Canada has a real labor shortage problem in that about 1 in 5 construction workers are retiring in the next 10 years.
So we have a tremendously skilled labor force that they're just aging and they want to stop working.
And they've done a lot for Canada to build all the things that we take for granted and pass by and use every day. The other problem that we view at Horizon is that we haven't had the same amount of young workers signing up to work in construction. Housing and affordability is a big problem in our country right now.
Majority of us spend, we should spend about 30% of our income on housing. But some of us, especially if we live in downtown urban centers, spend way more, sometimes 40 to 50 to even 60%.
So it takes a big chunk out of our pocketbooks and it takes away from what we can afford to do, you know, non housing related. And most people might be surprised to know that as it relates to construction and housing, sometimes up to half the cost to build new housing is due to labor, meaning the people that work for work on the project.
So it's really simple math. When you have dwindling labor pool and the cost is directly related to labor, we're going to have significant problems in keeping housing costs even at its current levels.
And the other context is that our Canadian government under Mark Carney is investing heavily in infrastructure. And at the end of the day you can certainly gather funding from large institutions to finance those projects. But those projects are going to have to be built by real people. And so there is a problem that we've seen foresaw for many years. And so we asked ourselves what can we do about it? And so that's why we went down this path and started investing in this area.
[00:14:14] Speaker B: What did Ganon Akwe teach you about deploying robotics in the real world that you just couldn't have learned in the lab?
[00:14:20] Speaker A: It created a culture for us of learning by doing as opposed to for me. You can engineer and plan out everything perfectly when you're sitting in your head office.
But we learned tremendously and we're able to iterate very quickly through first during the testing and research and development process, rapid prototyping, using hypothesis, assumption and validation to move through risks and all sorts of level of risks, technical risks, environmental risks, permitting and regulation risks, financing risks.
So you, you Know, just like any project, you name out those risks, but it's really how do you get a team of people who have never done this before to get over their fears or how do we overcome our fears and uncertainties and just move step by step through the uncertainties and risks? And you know, I think that while there were certain nail biting moments that we experienced, the team that came out of it felt way more confident about the viability, the commercial viability of this technology.
Prior to going in
[00:15:35] Speaker B: nun, let's talk a little bit about the development and what some of the benefits and what has the response been from the community of Gananakwe.
[00:15:42] Speaker A: I cannot say enough good things about the, the town of Gananoque. If we did this in another community, I'm not sure if we would have been able to achieve the same level of success or the results. Because it's not just about the technology, not just about the construction, it's about the leadership and support the people we're working with to work through the permitting, regulations and approvals.
We received support from both the previous mayor and the current mayor who are very open and embracing of our idea to bring new technology and to deliver.
So we delivered 26 units, eight of which are deemed affordable rentals. So purpose built rentals.
So we're renting them below market rates.
We were also able to deliver an energy efficient building that uses no greenhouse gases and its energy performance exceeds the national building code.
We received the unanimous support from their council, their planning committee, and we just had an open house, I think it was in April, where over 130 people visited. We had barbecues, invited neighbors from the community, and we're now getting invitations to do more in that region.
Just the nicest people, really nice.
And I think the most important thing is recognizing that we have a big housing challenge across the nation and they were willing to be open minded and to work through the technical and valid questions so that we can give birth to a completely new idea. But now that we've done it, we've kind of breaking that psychological barrier and we can do more.
[00:17:34] Speaker B: There must have been lots of surprises like technical and otherwise that changed the way you approach the technology. Like post Gandanakwe or post build?
[00:17:42] Speaker A: Yeah, absolutely. Where do I start?
Materials is a key one.
We had our supply chain for materials lined up four weeks before we showed up on site. The supplier said, I can't deliver this for you in the quantities that you need.
So we had to really scramble at the last minute to basically make our own solutions or come up with a solution.
We had gone in with a specific design. It was based on a crawler system, which was VAL1.
It was sort of like a robot on a tanker tracks, if you can imagine it that way. And then about, you know, we had given ourselves certain development times to build that machine and we had ordered it and everything. And then again, a couple of months later, they said, oh, there's this very long lead time for equipment and we can't deliver it for you. So then we had to re engineer the whole VAL system from scratch and do a completely new concept which there's a saying it's sort of you can turn problems into opportunities. So that's how we responded to it and that's how we came up with VAL2, which is actually for that build, much better than the original system that we came up with. We also had, believe it or not, international supply chains because that was disrupting us. So we had to reroute stuff from one country to another and there's a whole episode over that. So one adventure after another. But the mindset was always, this is very important, this has to be done and we'll find a solution. And the team came together and we always found a solution.
[00:19:21] Speaker B: It's exciting. It must be exciting every time. But you want probably less excitement, right?
[00:19:26] Speaker A: No, in certain moments I was not very happy. I was very stressed out and losing sleep.
But you know, I think it's when you go on a difficult journey, you want to go with great people that are going to, you know, keep an even keel and to keep moving forward and not lose faith or there's certain parts that does require faith. It's sort of like blind faith. So you kind of hold your breath and you keep going and you keep finding solutions, and that's how you move forward.
[00:19:58] Speaker B: What have you learned about then taking construction robots from R and D and then applying it commercially to commercially delivered buildings.
[00:20:05] Speaker A: So I think what we proved for ourselves in that project is that we can deliver a building, a residential building using robots at a competitive price compared to traditional construction. And as well, we were able to discover labor efficiencies and savings and certain processes that VAL does would require four times more of the traditional trade.
We also discovered and proved for ourselves that such buildings and this technology can satisfy building codes and regulations, which is also a very important bar or threshold to overcome.
And that this technology is financially viable, it's insurable, it works in open environment. That was. There was many technical uncertainties. So we proved that to ourselves and in our second project we now recently broke the barrier for Canada, so we went to two stories and we're going to continue and finish the third story. So we now know that this technology is viable for multi story construction and that's exciting. So it's not for the faint of heart.
It's not for the faint of heart, but for those with the right temperament, it's a really exciting ride.
[00:21:26] Speaker B: Nguyen When a customer comes to Horizon, they aren't buying a robot, they're looking to deliver a building. How does your robotics approach fit into that process?
[00:21:35] Speaker A: You're right. So building owners, they don't really care how we build the building. They want a solution, a final product that's predictable, affordable at the price point that they want and execute it efficiently, on time, on budget, all those things, just basically doing the things that you say you're going to do. And so that is our approach that we are delivering the turnkey building. And whether we use it with robots or minions or whatever, it's not the customer doesn't care about that.
And so it just so happens that we are investing in the technology, always pushing the envelope into technology utilization and development and looking at how we can take the technology, this technology and in the future, other technologies further. This is, we think, the future for construction. Also more importantly for the workforce that it's giving. At the end of the day, it's giving a better tool to workers so that their jobs are made easier.
So that concrete is a very labor intensive, back bending trade. You know, the people are operating the robots 85%. This is not a scientific number. This is my guesstimate that 85% of the hard work of laying concrete has been removed from that process.
So that makes it easier to convince people and attract people into this particular trade and also makes it more. The digitization of this part of construction is long overdue. Construction has typically lagged behind in other industries in digitization.
I believe that it's not because of lack of interest from people working in the sector. I've met so many people who are very interested and curious and want to be a part of this movement. It's really that it's difficult to innovate in a highly regulated industry, but the fact that we have done it once. I think it's changing what people can see as possible in this sector.
[00:23:51] Speaker B: It's such an exciting time and I think it's really cool the work that you guys are doing. Does a project need to be designed around your technology from the beginning or can Horizon Systems integrate into a more conventional construction Project?
[00:24:05] Speaker A: That's a great question. We can do both. We can take an architect's concept and build to the architect's vision from that approach. This technology is opening up the realm of possibility, architectural possibilities for designers, because architects typically are limited by rectangles. You must fit within a rectangle. And this particular Technology in concrete 3D printing allows you to print forms without any additional marginal cost, because to the robot, whether it moves in a linear way or a curved way, it doesn't really care.
So for architects, some have found it really exciting to expand the built form. Now, the other perspective is that you can't just put a piece of technology into an established process without making sure that everybody in that process is aligned and knows what to expect.
So it's better, significantly better, if the technology is introduced at the start of the design process.
Just like in motor assembly line or car assembly line, when they introduce automation, they do have to transform or adjust the process to receive this new technology.
It's not just the piece of equipment or the robot itself. It's thinking of the process and how we can make sure that everything is aligned so that it fits correctly.
[00:25:42] Speaker B: Noon. Are there any certain building types or projects where the technology makes really good sense today? I'm just listening. Somebody's out there listening, going, I wonder
[00:25:51] Speaker A: if
[00:25:51] Speaker B: this would be good for me.
[00:25:52] Speaker A: Yeah, I mean, there's people working on tons of other verticals or sectors, not just residential housing.
So this technology has been deployed and we call institutional projects. So you think of libraries or theaters where you, you want something really special. You want like a curved form or a feature wall. The technology allows for you to create. Every single section can be custom without custom pricing, which is typically more expensive.
So libraries, universities, future architectural pieces.
That's been demonstrated. It's also been deployed in infrastructure. Water infrastructure, sewer infrastructure. It's been used to create coral reefs. There's just a wide variety of applications. If you think of anything that needs concrete, maybe you can use a concrete 3D printer for it.
[00:26:49] Speaker B: You've come at this from a perspective of a developer, rather than, say, starting as a robot company looking for an application. How's that influence the technology and the way you're bringing it to the market?
[00:27:00] Speaker A: Our perspective as a developer and a construction company or a constructor, I'd like to believe that informs us on not just the technical aspects, but, but where the technology can best fit from a financial viability and overall product viability.
So it's not a tool looking for a solution.
We have a specific problem with the Product we need to make housing cheaper.
How can we build this technology and deploy it the right places so that we can utilize the best parts that this technology can offer?
[00:27:38] Speaker B: So you've proven that you can deploy the technology in a real development and you're talking about scaling now. What does scale actually mean to Horizon and does this differ from kind of modular companies using robotics?
[00:27:50] Speaker A: Yeah, absolutely. The federal government in Canada and many countries broadly have been trending towards this is a term in our world, modern methods of construction.
So it's open, it can mean a wide variety of things. And I believe there are seven different categories of different modern methods of construction, of which factory built housing is one of those categories. The other category that we currently belong to is additive manufacturing, but there is other different methods.
So how our technology and approach is different compared to factory built housing is that I believe factory based housing is very central and based on mass production. So you think of similar to car manufacturing. Our approach is completely different or I guess contrarian.
We follow what we consider mobile microfactory. So we still have a factory.
[00:28:53] Speaker B: Yes,
[00:28:54] Speaker A: but it's smaller and it goes on wheels and it can travel to and from site.
And the building approach is to build things on site. Now why we think that's advantageous because if you think of it, if you build a car, you can engineer the car to such precision that as the pieces, there's let's say 1,000 pieces to assemble a car. You can assemble it and everything will fit to the millimeter precision. But a building is very big and you build the components of the building and factory and then when you transport it to, you find that the pieces don't fit together well.
And then you have to travel over bridges and tunnels and you're limited by what you can carry over those distances.
So our view is that let's see what we can do to utilize the benefits of factory based standardization approach.
As you're assembling it on site, you can adapt to the site and you don't have to fit a cookie cutter but box into every site. You can build whatever the building the architect requires. If they want an L shaped building, a curve shaped building, a triangular building, you can adapt it to that site and to whatever parcel of land you have available. So it's a factory approach, but smaller cost of capital and overhead, more flexible and adaptable to building construction.
[00:30:20] Speaker B: As you're kind of looking at the next gen of construction robots and the overall system, where's the technology heading from your perspective?
[00:30:29] Speaker A: For us, we're focused on scaling to Higher stories. So we've done a two story building. Now we have our two thirds complete. Our three story building, we're planning a four story building and then likely six to ten stories. So going higher.
And our focus is really in our industry. We call it missing middle housing. So missing middle is housing that hasn't been built and missing. And what that means is we built a lot of low rises. So you think of your suburban neighborhoods and then we build a lot of high density, high rise buildings, 10, 20 stories. But the Goldilocks size buildings in the middle, we haven't been spending that much time doing. So from a market perspective, that's the type of housing that we'd like to focus on. The Goldilocks in the middle kind of building.
And then to answer that question from a technology perspective, there are so many different areas that technology can be applied to construction. I wish I had the time and energy to do it all, but I see a lot of opportunities. I'm an entrepreneur, so I guess that's the way my brain functions.
But speaking to the audience, I think that it's a very exciting time.
If our audience was looking into technologies that can help build more infrastructure, it doesn't have to be what we're doing, but it could be so many other different things because there's heavy investments globally for infrastructure and there are for really smart people like your audience. There's a lot of opportunities for smart people to solve problems in construction through technology.
[00:32:17] Speaker B: What still needs to be solved for Horizon or for the industry more broadly, for construction, robotics to become more common
[00:32:24] Speaker A: for us, it's really. That comes back to the scaling question. So just your basic things, staffing, regulations and certifications, training, like, you know, sometimes it's just bread and butter issues.
We think that it's all doable.
Anything is doable, you know, given the time and the right resources and the right environment. And certainly right now in Canada, I mean, I was at the Canadian Robotics Council conference last week in Toronto on Monday and it appeared to me, based on what I heard there, is that the environment is being created in Canada to support Canadian made robotics and technology. That we are recognizing that we have the resources to do that as a nation. We're mobilizing our best and brightest to do that.
So I think that this is a. It's a really good time to be in robotics right now. And it's a great opportunity for your audience who are curious about these subjects to kind of pay attention.
[00:33:28] Speaker B: You've a really multidisciplinary team. And so as you grow. What kinds of people and skills are you shopping for?
[00:33:35] Speaker A: Controls, electrical, mechatronics, software. At the robotics level and at the architectural level, we've hired and we have people on our team, sort of a new category of architects called digital architects.
There are people who are trained in architecture but then have a background during their schooling. They understand what we call design for manufacturing. So design.
Traditional architects are trained as artists really and they view their creation as an art, creation as a custom bespoke form. Digital architects also have that viewpoint, but they're also equipped to understand the limitations and the technologies of robotics, how to design with that in mind. And as well, design for manufacturing is a completely different field. It's a new emerging field in construction architecture. That's exciting. One of the top. You know, Canada has like a handful of universities and institutions that have this kind of knowledge.
And as we move towards either factory based housing construction, kind of the area that Horizon is doing that, that will, that is becoming an emerging.
[00:34:57] Speaker B: So get your crystal ball out here in maybe 10 or 15 years, what do you hope a construction site looks like?
[00:35:03] Speaker A: It's going to be a mix. I mean it could be looking like our site where you have robots running around. It's also other sites will look like a more organized assembly site, final assembly site, as opposed to like basic craft based assembly.
So what I mean by that is, you know, modular factory based construction.
They have prefabricated panels or volumes that just have a crane. It takes a very fast assembly time to put together going to have a site like ours. We have maybe a couple of robots running around per floor.
But hopefully what I would love to see and what we're working hard towards is more advanced technologies, better planning. Construction is a beast of an animal and it's so because planning an organization is very complex. But to the extent that we can use better tools, digital tools, technologies to do that, to help people reduce their stress and do their jobs better, that's, that's what we're working towards.
[00:36:11] Speaker B: When you're not knee deep in construction or robotics, what do you like to do? Do you have any hobbies?
[00:36:17] Speaker A: Yeah, probably too many hobbies.
So I really love the water. So this year my husband and I, we had two kayaks and we're really into kayaking.
[00:36:32] Speaker B: Nice.
[00:36:32] Speaker A: So that's a very peaceful thing that I do to be in nature. So anything related to nature. So water, kayaking, hiking, camping, those sorts of things is my go to.
[00:36:50] Speaker B: And so if the listeners are out there and wow, I need to learn more about Horizon legacy or maybe they want to connect with you.
Where should they go
[00:37:01] Speaker A: to learn about Horizon and what we do? They can go to our website horizonlegacy.com they can also search my name on LinkedIn.
Nyong Nguyen I'm pretty active on there so I will respond or sometimes lately I haven't been so active since I'm doing other stuff but I'm generally quite active there and I post about or like things related to this.
So all of my feeds on LinkedIn is related to construction robotics and I can happy to share some of those things and what's happening in this industry.
[00:37:36] Speaker B: Nguyen thanks very much for coming onto the podcast. I'm going to put all the information in the show notes and I wish you good luck and I hope to visit some of your sites coming up and it's just a very exciting thing to be doing in Canada.
[00:37:53] Speaker A: Thank you. It's great to know you as well and to meet you through work.
We're one part work, but it's also the people that you get to meet along the journey.
I found that you and as well the robotics community in Canada are so supportive and it's just great to be a part of the community.
[00:38:18] Speaker B: You might know that I run a marketing consultancy called Customer Attraction where we focus on marketing, branding strategy and content creation. We do a lot of project work and help you with your marketing challenges and we're focused on automation integration and robotics and we welcome new customers and projects and can help you with your marketing or fix your website or perform a marketing audit. And I'd like to acknowledge a three the association for Advancing Automation. They're the leading automation trade associations for robotics, vision and imaging, motion control and motors and the industrial artificial intelligence technologies. Visit automate.org to learn more. And if you'd like to get in touch with me at the Robot Industry podcast, you can find me Jim Beretta on LinkedIn. Today's podcast was produced by Customer Attraction Industrial Marketing and I'd like to thank my team Chris Gray for the music, my business partner Janet and I'd like to thank my senior audio software engineer Jeff Bremner and you can find more information on his link tree. And that's L I N K T R E E slash gbaudio. Be safe out there. Thanks for listening and thanks for subscribing and good to see you.